Ian Baker
Curriculum Vitae

CONTENTS

REFEREED JOURNAL ARTICLES

Top of Page

  1. "The Effect of Particle Size and Spacing on the Retardation of Recrystallization in Two-Phase Copper Crystals", I. Baker and J.W. Martin, Journal of Materials Science, 15 (1980) 1533-1538.

  2. "Effect of Fine Second-Phase Particles on the Deformation Structure in Cold-Rolled Copper Single Crystals", I. Baker and J.W. Martin, Metal Science, 17 (1983) 459-467.

  3. "Effect of Fine Second-Phase Particles on Stored Energy and Recrystallization Kinetics of Cold-Rolled Copper Single Crystals", I. Baker and J.W. Martin, Metal Science, 17 (1983) 469-474.

  4. "Metallographic Observations of Dynamic Recrystallization in Ni3Al", I. Baker, D.V. Viens and E.M. Schulson, Scripta Metallurgica, 18 237-240 (1984).

  5. "Annealing Studies of Cold-Rolled Ni3Al", I. Baker, D.V. Viens and E.M. Schulson, Journal of Materials Science, 19 (1984) 1799-1804.

  6. "Rapidly Solidified and Annealed Powders of Ni3Al", I. Baker, F.S. Ichishita, V.A. Surprenant and E.M. Schulson, Metallography, 17 (1984) 299-314.

  7. "The Structure of Extruded NiAl", I. Baker and E.M. Schulson, Metallurgical Transactions, A, 15A (1984) 1129-1136.

  8. "On Intrinsic Stacking Faults in Polycrystalline Ni3Al", I. Baker and E.M. Schulson, Physica Status Solidi, (a) 85 (1984) 481-490.

  9. "The Effect of Temperature on Dislocation Structures in Ni3Al", I. Baker and E.M. Schulson, Physica Status Solidi, (a) 89 (1985) 163-172.

  10. "The Effect of Grain Size on Yield Strength of Polycrystalline Ni3Al", E.M. Schulson, T.P. Weihs, D.V. Viens and I. Baker, Acta Metallurgica, 33 (1985) 1587-1591.

  11. "Boron-Induced Grain Boundary Accommodation of Slip in Ni3Al", E.M. Schulson, T.P. Weihs, I. Baker, H.J. Frost and J.A. Horton, Scripta Metallurgica, 19 (1985) 1497-1498.

  12. "A Method for Determining Dislocation Burgers' Vectors in Ice", I. Baker, J. Electron Microscopy Technique, 3 (1986) 357-358.

  13. "Transmission Electron Microscopy of Rapidly Solidified Powders of Ni3Al", I. Baker, J.A. Horton and E.M. Schulson, Metallography, 19 (1986) 63-74.

  14. "Grain Boundary Accommodation of Slip in Ni3Al Containing Boron", E.M. Schulson, T.P. Weihs, I. Baker, H.J. Frost and J.A. Horton, Acta Metallurgica, 34 (1986) 1395-1399.

  15. "The Structure of Consolidated Rapidly Solidified Powders of Ni3Al", I. Baker, J.A. Horton and E.M. Schulson, Journal of Materials Science, 21 (1986) 3297-3301.

  16. "Displacement Fringes in FeAl", I. Baker and D.J. Gaydosh, Physica Status Solidi (a), 96 (1986) 185-190.

  17. "Some Comments on Dislocation Bowing and Partial Separation During In-Situ Straining of g´ Ni3Al", I. Baker, J.A. Horton and E.M. Schulson, Philosophical Magazine Letters, 55 (1987) 3-6.

  18. "In-Situ Straining of Ni3Al in a Transmission Electron Microscope", I. Baker, E.M. Schulson and J.A. Horton, Acta Metallurgica, 35, (1987) 1533-1541.

  19. "Dynamic Recrystallization and Grain Boundary Migration in B2 FeAl", I. Baker and D.J. Gaydosh, Metallography, 20 (1987) 347-357.

  20. "Flow and Fracture of Fe-Al", I. Baker and D.J. Gaydosh, Materials Science and Engineering, 96 (1987)147-158.

  21. "Discussion of "The Role of Boron in Ductilizing Ni3Al", E.M. Schulson, I. Baker and H.J. Frost, Metallurgical Transactions, A 18A (1987) 1995.

  22. "The Effect of Boron on the Lattice Properties of Ni3Al", I. Baker, B. Huang and E.M. Schulson, Acta Metallurgica, 36 (1988) 493-499.

  23. "The Effect of Boron on the Chemistry of Grain Boundaries in Stoichiometric Ni3Al", I. Baker, E.M. Schulson and J.R. Michael, Philosophical Magazine Letters, 57 (1988) 379-385.

  24. "The Strength of Ni3Al Containing Boron and Titanium", S.R. Spear, G.W. Clothier, E.M. Schulson and I. Baker, Metallurgical Transactions A, 19A (1988) 732-734.

  25. "The Microstructure of Ni3Al Ingots Containing Boron", V. Zinoviev, E.M. Schulson and I. Baker, Metallography, 21 (1988) 207-215.

  26. "Grain Boundary Chemistry of NiAl", P.P. Camus, I. Baker, J.A. Horton and M.K. Miller, Journal de Physique, 49 C6 (1988) 329-333.

  27. "The Microstructure of Extruded Ingots of Ni3Al Containing Boron", V. Zinoviev, E.M. Schulson and I. Baker, Metallography, 21 (1988) 391-399.

  28. "On Grain Boundary Disorder and the Tensile Ductility of Polycrystalline Ordered Alloys: a Hypothesis", I. Baker and E.M. Schulson, Scripta Metallurgica, 23 (1989) 345-348.

  29. "Fractography of Ice", E.M. Schulson, I. Baker, C.D. Robertson, R.B. Bolon and R.J. Harnimon, Journal of Materials Science Letters, 8 (1989) 1193-1194.

  30. "Observation of <111> Slip in NiAl", P.R. Munroe and I. Baker, Scripta Metallurgica, 23 (1989) 495-499.

  31. "Room Temperature Tensile Ductility in Polycrystalline B2 Ni-30Al-20Fe", S. Guha, P.R. Munroe and I. Baker, Scripta Metallurgica, 23(1989) 897-900.

  32. "The Microstructure of Extruded Fe-Al", P.R. Munroe and I. Baker, Journal of Materials Science, 24 (1989) 4246-4252.

  33. "Auger Electron Spectroscopy Study of Ni3Si", I. Baker, R.A. Padgett and E.M. Schulson, Scripta Metallurgica, 23 (1989) 1969-1974.

  34. "On Grain Boundaries in Nickel-rich Ni3Al", I. Baker and E. M. Schulson, Scripta Metallurgica, 23 (1989) 1883-1886.

  35. "The Strength and Ductility of Ni3Si", E.M. Schulson, L.J. Briggs and I. Baker, Acta Metallurgica et Materialia, 38 (1990) 207-213.

  36. "Intermetallic and Void Formation in Gold Wirebonds to Aluminum Films", L. Maiocco, D. Smyers, S. Kadiyala and I. Baker, Materials Characterization, 24 (1990) 293-309.

  37. "The Effect of Oxygen on Auger Electron Spectroscopy of FeAl and NiAl", I. Baker, E.P. George and R.A. Padgett, Scripta Metallurgica et Materialia, 24 (1990) 2095-2099.

  38. "Correlation Between Electrical Resistance and Microstructure in Gold Wirebonds to Aluminum Films", L. Maiocco, D. Smyers, P.R. Munroe and I. Baker, Transactions of IEEE on Components, Hybrids and Manufacturing Technology, 13 (1990) 592-595.

  39. "The Effect of Grain Size on the Room Temperature Ductility of NiAl", P. Nagpal and I. Baker, Scripta Metallurgica et Materialia, 24(1990) 2381-2384.

  40. "Effect of Cooling Rate on Hardness of FeAl and NiAl", P. Nagpal and I. Baker, Metallurgical Transactions, 21A (1990) 2281-2282.

  41. "Microstructure and Mechanical Properties of Fe-40Al + Cr Alloys", P.R. Munroe and I. Baker, Scripta Metallurgica et Materialia, 24 (1990) 2273-2278.

  42. "The Effects of Both Deviation from Stoichiometry and of Boron on the Chemistry of Grain Boundaries in Ni3Al ", I. Baker, E.M. Schulson, J.R. Michael and S.J. Pennycook, Philosophical Magazine, 62 (1990) 659-676.

  43. "Room Temperature Deformation Behavior of Multiphase Ni-20 at. % Al-30 at. % Fe and its Constituent Phases", S. Guha, P.R. Munroe and I. Baker, Materials Science and Engineering, A131 (1991) 27-37.

  44. "Slip-plane Disordering in Stoichiometric Ni3Al", J.A. Horton, I. Baker and M.H. Yoo, Philosophical Magazine, 63 (1991) 319-336.

  45. "Observation of <001> Dislocations and a Mechanism for Transgranular Fracture on {001} in FeAl", P.R. Munroe and I. Baker, Acta Metallurgica et Materialia, 39 (1991) 1011-1017.

  46. "Ternary Atom Site Location in L12-Structured Intermetallic Compounds", P.R. Munroe and I. Baker, Journal of Materials Research, 6 (1991) 943-949.

  47. "On Slip Transmission Across Grain Boundaries and the Brittle to Ductile Transition in Ni3Al and other L12 alloys", E. M. Schulson and I. Baker, Scripta Metallurgica et Materialia, 25 (1991) 1253-1258. (Invited)

  48. "Room-temperature deformation of PdIn", P.R. Munroe, I. Baker and P. Nagpal, Journal of Materials Science, 26 (1991) 4303-4306.

  49. "The Effect of Grain Size on the Yield Strength of FeAl and NiAl", I. Baker, P. Nagpal, F. Liu and P.R. Munroe, Acta Metallurgica et Materialia, 39 (1991) 1637-1644.

  50. "Microstructure of As-Cast Al69Ti23Ni8", P.R. Munroe and I. Baker, Materials Characterization, 27 (1991) 45-52.

  51. "The Yield Strength of Off-stoichiometric Ni3Al with and without Boron", E.M. Schulson, Y. Xu, P.R. Munroe, S. Guha and I. Baker, Acta Metallurgica et Materialia, 39(1991) 2971-2975.

  52. "Room Temperature Fracture of FeAl and NiAl", P. Nagpal and I. Baker, Materials Characterization, 27 (1991) 167-173.

  53. "Extrusion Characteristics of Iron Aluminides", P. Nagpal and I. Baker, Materials and Manufacturing Processes, 6 (1991) 695-707. (Invited)

  54. "The Effect of Strain Rate on The Room-Temperature Ductility of FeAl", P. Nagpal and I. Baker, Scripta Metallurgica et Materialia, 25 (1991) 2577-2580.

  55. "Dislocations and Grain Boundaries in Polycrystalline Ice: A Preliminary Study by Synchrotron X-ray Topography", F. Liu, I. Baker, G. Yao and M. Dudley, Journal of Materials Science, 27 (1992) 2719-2725.

  56. "Dynamic Observations of Dislocation Sources at Grain Boundaries in Ice", F. Liu, I. Baker, G. Yao and M. Dudley, Philosophical Magazine Letters, 65 (1992) 279-281.

  57. "Dislocation arrangements in polycrystalline NiAl after room temperature deformation", P. Nagpal and I. Baker, Journal of Materials Science Letters, 11 (1992) 1209-1210.

  58. "The Effect of Annealing on Ni-Al-Fe B2 Compounds", S. Guha, I. Baker, P.R. Munroe and J.R. Michael, Materials Science and Engineering, A152 (1992) 258-263.

  59. "Effect of Accelerating Voltage on Planar and Axial Channeling in Ordered Intermetallic Compounds", P.R. Munroe and I. Baker, Journal of Materials Research, 7 (1992) 2119-2125.

  60. "Effect of Chromium on the Environmental Sensitivity of FeAl at Room Temperature", O. Klein and I. Baker, Scripta Metallurgica et Materialia, 27 (1992) 1823-1828.

  61. "The Dependence of Recrystallization Temperature and Stored Energy on Rolling Strain in Polycrystalline Copper", L. Liu and I. Baker, Scripta Metallurgica et Materialia, 28 (1993) 197-200.

  62. "Hard Sphere Modelling of the Effect of Slip on Interstitial Sites in B2 Compounds", I. Baker, Journal of Materials Research, 8 (1993) 1203-1205.

  63. "Formation of L12-Structured Ni3Si", I. Baker, J. Yuan and E.M. Schulson, Metallurgical Transactions, 24A (1993) 283-292.

  64. "Transmission Electron Microscope In situ Straining of Multiphase Ni-20 at. % Al-30 at. % Fe", I. Baker, S. Guha and J.A. Horton, Philosophical Magazine, 67 (1993) 663-674.

  65. "The Temperature Dependence of the Flow and Fracture of Fe-40Al", H. Xiao and I. Baker, Scripta Metallurgica et Materialia, 28 (1993) 1411-1416.

  66. "A Compression Jig for X-ray Topography of Ice", F. Liu and I. Baker, Measurement Science and Technology, 4 (1993) 416-421.

  67. "In situ Straining of Fe-Al in a Transmission Electron Microscope", I. Baker and J.A. Horton, Philosophical Magazine, 67 (1993) 479-489.

  68. "Dynamic Observations of Dislocation Generation at Grain Boundaries in Ice", F. Liu, I. Baker and M. Dudley, Philosophical Magazine, A 67 (1993) 1261-1276.

  69. "Room Temperature Deformation Modes in D03-structured Fe-34Al and Fe-28Al + 6Cr", P.R. Munroe and I. Baker, Journal of Materials Science, 28 (1993) 2299-2303.

  70. "Room Temperature Deformation of Lead - Based "Superalloys"", I. Baker, Acta Metallurgica et Materialia, 41 (1993) 2633-2638.

  71. "Comments on "Optimization of the Boron Content in FeAl (40 at. % Al) Alloys"", I. Baker, Scripta Metallurgica et Materialia, 29 (1993) 835-836.

  72. "Order and Recrystallization in Fe-70 at. % Co", L. Zhao and I. Baker, Philosophical Magazine Letters, 68 (1993) 327-333.

  73. "Effects of Boron and Grain Size on the Strain-Rate Sensitivity of Fe-45Al", I. Baker, O. Klein, C. Nelson and E. P. George, Scripta Metallurgica et Materialia, 30 (1994) 863-868.

  74. "Studies of Defect Behavior in Large-Grain, Polycrystalline Ice Using Synchrotron X-Ray Topography", M. Dudley, F. Liu and I. Baker, Molecular Crystals and Liquid Crystals, 240 (1994) 73-80.

  75. "Effect of Heat-Treatment on the Tensile Behavior of Iron-Rich FeAl and FeAl + B", O. Klein and I. Baker, Scripta Metallurgica et Materialia, 30 (1994) 627-632.

  76. "TEM In situ Straining of NiAl", P. Nagpal, I. Baker and J.A. Horton, Intermetallics, 2 (1994) 23-29.

  77. "Extrusion processing of FeCo", L. Zhao and I. Baker, Journal of Materials Science, 29 (1994) 742-748.

  78. "Long Range Order and Defect Concentrations in NiAl and CoAl", H. Xiao and I. Baker, Acta Metallurgica et Materialia, 42 (1994) 1535-1540.

  79. "Synchrotron X-ray Topographic Studies of Grain Boundaries", F. Liu and I. Baker, Microscopy Society of America Bulletin, 24 (1994), 351-358. (Invited)

  80. "The Effect of Internal Oxidation on the Stored Energy and Recrystallization of Copper Single Crystals", I. Baker and L. Liu, Scripta Metallurgica et Materialia, 30 (1994) 1167-1170.

  81. "The Effect of Boron on the Temperature Dependence of the Flow and Fracture of Fe-45Al", O. Klein and I. Baker, Scripta Metallurgica et Materialia, 30 (1994) 1413-1417.

  82. "The Effect of Grain Size and Fe:Co ratio on the Room Temperature Yielding of FeCo", L. Zhao and I. Baker, Acta Metallurgica et Materialia, 42 (1994) 1953-1958.

  83. "Room Temperature Fracture of CoAl", H. Xiao and I. Baker, Materials Characterization, 33 (1994) 187-191.

  84. "The Effect of Grain Size on the Stored Energy of Cold Work as a Function of Strain for Polycrystalline Nickel", I. Baker, L. Liu and D. Mandal, Scripta Metallurgica et Materialia, 32 (1995) 167-171.

  85. "Thermally-induced dislocation loops in polycrystalline ice", F. Liu, I. Baker and M. Dudley, Philosophical Magazine, 71 (1995) 1-14.

  86. "The Relationship between Point Defects and Mechanical Properties in FeAl at Room Temperature", H. Xiao and I. Baker, Acta Metallurgica et Materialia, 43 (1995) 391-396.

  87. "The dislocation structure in L12 ordered alloy Ni3Ge", J. Fang, E.M. Schulson and I. Baker, Philosophical Magazine, 70 (1994) 1013-1025.

  88. "Dislocation/grain boundary interactions in ice crystals", F. Liu, I. Baker and M. Dudley, Philosophical Magazine, 71 (1995) 15-42.

  89. "A Review of the Mechanical Properties of B2 Compounds", I. Baker, Materials Science and Engineering, A192/193 (1995) 1-13. (Invited)

  90. "The Effect of Temperature and Fe:Al Ratio on the Flow and Fracture of FeAl", I. Baker, H. Xiao, O. Klein, C. Nelson and J.D. Whittenberger, Acta Metallurgica et Materialia, 43 (1995) 1723-1730.

  91. "The Microstructures of Multi-Phase Ni-20Al-30Fe and its Constituent Phases", S. Guha, I. Baker and P.R. Munroe, Materials Characterization, 34 (1995) 181-188.

  92. "Determination of the Stored Energy and Recrystallization Temperature as a Function of Depth after Rolling of Polycrystalline Copper", D. Mandal and I. Baker, Scripta Metallurgica et Materialia, 33 (1995) 645-650.

  93. "Measurement of the Energy of Grain Boundary Geometrically-Necessary Dislocations in Copper", D. Mandal and I. Baker, Scripta Metallurgica et Materialia, 33 (1995) 831-836.

  94. "Dislocations in Fe-45Al + B after High-Temperature Deformation", P.R. Munroe and I. Baker, Philosophical Magazine, 72 (1995) 1301-1310.

  95. "Dry Sliding Wear of NiAl", B.J. Johnson, F.E. Kennedy and I. Baker, Wear, 192 (1996) 241-147.

  96. "Production and Properties of Two-Phase Nanocrystalline Fe/Cu Compacts", F. Liu and I. Baker, Nanostructured Materials, 7 (1996) 13-23.

  97. "The Effect of X - Radiation on the Plastic Deformation of Ice", X. Hu, F. Liu, I. Baker and D. Black, Philosophical Magazine, 73 (1996) 1355-1361.

  98. "Recrystallization of FeAl and Ni3Al with and without boron", Y. Yang and I. Baker, Scripta Metallurgica et Materialia, 34 (1996) 803-807.

  99. "Observation of Slip Transmission Through a Grain Boundary in Ice", K. Jia, I. Baker, F. Liu and M. Dudley, Journal of Materials Science, 31 (1996) 2373-2378.

  100. "In-Situ X-ray Topographic Observations of Notches in Ice", X. Hu, I. Baker and M. Dudley, Scripta Metallurgica et Materialia, 34 (1996) 491-497.

  101. "The Effect of Boron on the Hall-Petch Behavior of Fe-45Al", X. Li and I. Baker, Scripta Metallurgica et Materialia, 34 (1996) 1219-1223.

  102. "The Effects of X-Radiation on the Plastic Deformation of II-VI Compounds", V.F. Petrenko, N.N. Khusnadinov and I. Baker, Physics Review B, 53 (1996) 15401-15404.

  103. "Identification of a High Temperature Magnetic Phase Transition in Ball-Milled Nanocrystalline Fe-Cu Alloys", R.D. Shull, J.P. Cline, I. Baker and F. Liu, Journal of Applied Physics, 79 (1996) 6028-6030.

  104. "Comments on "The Effect of Directional Solidification on the Structure and Property of Ni50Al20Fe30"", I. Baker and S. Guha, Scripta Metallurgica et Materialia, 35 (1996) 557-559.

  105. "Elevated Temperature Deformation of Multi-Phase Ni-20Al-30Fe and its Constituent Phases", S. Guha, I. Baker and P.R. Munroe, Journal of Materials Science, 31 (1996) 4055-4065.

  106. "On the Effect of Fine Second-Phase Particles on Primary Recrystallization as a Function of Strain", D. Mandal and I. Baker, Acta Metallurgica et Materialia, 45 (1997) 453-461.

  107. "The Effect of Strain Rate on the Yield Strength Peak in Fe-45Al", X. Li and I. Baker, Scripta Metallurgica et Materialia, 36 (1997) 1387-1390.

  108. "An Experimental Study of Equal Channel Angular Extrusion", Y. Wu and I. Baker, Scripta Metallurgica et Materialia, 37 (1997) 437-442.

  109. "Temperature Dependence of Dislocations in Notched Ice", X. Hu, I. Baker and M. Dudley, Journal of Physical Chemistry B, 101 (1997) 6102-6104.

  110. "Observation of Dislocations in Ice", I. Baker, Journal of Physical Chemistry B, 101 (1997) 6158-6162.

  111. "On the Yield strength Anomaly in Stoichiometric FeAl", I. Baker and Y. Yang, Materials Science and Engineering, A239-240 (1997) 109-117.

  112. "The Mechanical Properties of FeAl", I. Baker and P.R. Munroe, International Materials Reviews, 42 (1997) 181-205. (Invited)

  113. "The Influence of Vacancy Concentration on the Yield and Flow Behavior of Fe-40Al", Y. Yang and I. Baker, Intermetallics, 6 (1998) 167-175.

  114. "Yield Strength as a function of Aluminum Concentration in FeAl", I. Baker, X. Li, H. Xiao, R. L. Carlton and E. P. George, Intermetallics, 6 (1998) 177-183.

  115. "A Model for the Temperature Dependence of the Yield Strength of FeAl", E.P. George and I. Baker, Philosophical Magazine, 77 (1998) 737-750.

  116. "Vacancies and the Yield Anomaly of FeAl", E.P. George and I. Baker, Intermetallics, 6 (1998) 759-763.

  117. "On the Mechanism of the Paramagnetic to Ferromagnetic Transition in FeAl", Y. Yang, I. Baker, and P. Martin, Philosophical Magazine B, 79 (1999) 449-461.

  118. "The Yield Stress Anomaly in Stoichiometric FeAl at High Strain Rate", Y.Yang, I. Baker, R.T. Gray, III and C. Cady, Scripta Materialia, 40 (1999) 403-408.

  119. "Effect of Vacancies on the Tensile Properties of Fe-40Al Single Crystals in Air and Vacuum", Y. Yang, I. Baker and E.P. George, Materials Characterization, 42 (1999) 161-168.

  120. "Mechanical Properties of Strongly-Ordered B2 Compounds", I. Baker, Transactions of Nonferrous Metals Society of China, 9 (1999) 146-156. (Invited)

  121. "Improving the Ductility of Intermetallic Compounds by Particle-Induced Slip Homogenization", I. Baker, Scripta Materialia, 41 (1999) 409-414.

  122. "Solute Partitioning in TiAl/Ti3Al Alloys", P.R. Munroe and I. Baker, Scripta Materialia, 41 (1999) 1295-1299.

  123. "The Orientation Dependence of the Strength of Ice Single Crystals", Y. L. Trickett, I. Baker and P.M.S. Pradhan, Journal of Glaciology, 46 (2000) 41-44.

  124. "Dislocation Motion at Notch-Tips in Ice Single Crystals: Experiments and Interpretation", D. Cullen, X. Hu, I. Baker and M. Dudley, Cold Regions Science and Engineering, 31 (2000) 103-117.

  125. "The Effects of Sulfuric Acid on the Mechanical Properties of Ice Single Crystals", Y. L. Trickett, I. Baker and P.M.S. Pradhan, Journal of Glaciology, 46 (2000) 239-243.

  126. "Recovery, Recrystallization and Grain Growth in Ordered Alloys", I. Baker, Intermetallics, 8 (2000) 1183-1196. (Invited)

  127. "X-ray Topographic Observations of Dislocation/Grain Boundary Interactions in Ice", I. Baker, F. Liu, K. Jia, X. Hu, D. Cullen and M. Dudley, Annals of Glaciology, 31 (2000) 236-240.

  128. "The Effect of Environment and Strain Rate on the Room Temperature Tensile Properties of FeAl Single Crystals", D. Wu and I. Baker, Intermetallics, 9 (2001) 57-65.

  129. "The Chemistry of Grain Boundaries in Greenland Ice", D. Cullen and I. Baker, Journal of Glaciology, 46 (2001) 703-706.

  130. "On the Electrical Properties of Dislocations in ZnS Using Electric Force Microscopy", G.F. Bai, V.F. Petrenko and I. Baker, Scanning, 23 (2001) 160-164.

  131. "Observation of Impurities in Ice", D. Cullen and I. Baker, Microscopy Research and Technique, 55 (2001) 198-207.

  132. "The Role of Edge and Screw Dislocations on Hydrogen Embrittlement of Fe-40Al", M. Wittmann, D. Wu, I. Baker, E.P. George, and L. Heatherly, Materials Science and Engineering, 319-321 (2001) 352-355.

  133. "Directional Recrystallization of Cold-Rolled Copper Single Crystals", J. Li and I. Baker, Acta Materialia, 50 (2002) 805-813.

  134. "Microstructure, Mechanical Properties and Wear of Ni-Al-Fe Alloys", I. Baker, M. George, F.E. Kennedy and P.R. Munroe, Materials Science and Engineering, A325 (2002) 1-8.

  135. "Examination of Dislocations in Ice", I. Baker, Crystal Growth and Design, 2 (2002) 127-134. (Invited)

  136. "Mechanical Properties of Soft Magnetic FeCo Alloys”, E. P. George, A. N. Gubbi, I. Baker and L. Robertson, Materials Science and Engineering, A, 329-331 (2002) 324-332.

  137. "Strain-Induced Ferromagnetism in FeAl Single Crystals”, D. Wu and I. Baker, Materials Science and Engineering, A, 329-331 (2002) 334-338.

  138. "On the Yield Strength Anomaly in Stoichiometric CoTi”, M. Wittmann and I. Baker, Materials Science and Engineering, A, 329-331 (2002) 206-212.

  139. "The Effects of Environment on the Room-Temperature Mechanical Behavior of Single-Slip Oriented FeAl Single Crystals”, I. Baker, D. Wu, S. O. Kruijver, and E.P. George, Materials Science and Engineering, A, 329-331 (2002) 726-730.

  140.  “Sulfate Crystallites in Vostok Accretion Ice”, D. Cullen and I. Baker, Materials Characterization, 48 (2002) 263-270.

  141. "The Activation Energy of APB Tube Annihilation in FeAl", D. Wu and I. Baker, Philosophical Magazine, 82 (2002) 2239-2248.

  142.  "Microstructural Evolution During Directional Annealing", A.Y. Badmos, H.J. Frost and I. Baker, Acta Materialia, 50 (2002) 3347-3359.

  143. "Preliminary Microstructural and Microchemical Observations of Pond and River Accretion Ice", D. Iliescu, I. Baker, and D. Cullen, Cold Regions Science and Engineering, 35 (2002) 81-99.

  144.  "The Effect of Hot Zone Velocity and Temperature Gradient on the Directional Recrystallization of Polycrystalline Nickel", J. Li, S.L. Johns B. Iliescu, H.J. Frost and I. Baker, Acta Materialia,, 50 (2002) 4491-4497.

  145. "Imaging of Uncoated Snow Crystals Using a Low-Vacuum Scanning Electron Microscope", D. Iliescu and I. Baker, Journal of Glaciology, 48 (162) (2002), 479-480.

  146. "The Strain-Induced Paramagnetic to Ferromagnetic Transition in FeAl: Experiments and Calculations", D. Wu, P.R. Munroe and I. Baker, Philosophical Magazine, 83 (2003) 295-313.

  147.  “The Structure and Chemistry of 94m GISP2 ice”, I. Baker and D. Cullen, Annals of Glaciology, 35 (2003) 224-230.

  148.  "The effects of sulfuric acid on the creep, recrystallization, and electrical properties of ice", D. Iliescu, I. Baker and X. Li, Canadian Journal of Physics, 81 (2003) 395-400.

  149. "SEM/EDS observations of impurities in polar ice: artifacts or not?”, Ian Baker and Daniel Cullen, Journal of Glaciology, 49(16) (2003) 184-190.

  150. "The microstructural location of impurities in ice ", I. Baker, D. Cullen and D. Iliescu, Canadian Journal of Physics, 81 (2003) 1-9.

  151. "Simulation of Microstructural Evolution During Directional Annealing with Variable Boundary Energy and Mobility", A.Y. Badmos, H.J. Frost and I. Baker, Acta Materialia, 51 (2003) 2755-2764.

  152. “SEM/EDS Comparison of Polar and Seasonal Temperate Ice” R. Obbard, D. Iliescu, D. Cullen. J. Chang and I. Baker, Microscopy Research and Technique, 62 (2003) 49-61.

  153. “Imaging Dislocations in Ice”, Ian Baker, Microscopy Research and Technique, 62 (2003) 70-82.

  154. “An EBSP Study of Isothermally Annealed Cold-Rolled Nickel”, I. Baker and J. Li, Microscopy Research and Technique, 63 (2004) 289-297.

  155.  “Determining the Orientations of Ice Crystals using Electron Backscatter Patterns”, D. Iliescu, I. Baker and H. Chang, Microscopy Research and Technique, 63 (2004) 183-187.

  156. “Observation of Strain-Induced Ferromagnetism in Off-Stoichiometric Fe2AlMn Single Crystals” I. Baker, D. Wu, M. Wittmann and P.R. Munroe, Materials Characterization, 52/3 (2004) 209-216.

  157. “An EBSP Study of Statically and Directionally Recrystallized Cold-rolled Nickel”, I. Baker, J. Li and H. J. Frost, TMS Letters, 1(4) (2004) 67-68.

  158. "The Effect of Substitutional Elements on the Strain-Induced Ferromagnetism in B2-structured Fe-Al Single Crystals", D. Wu, I. Baker and P.R. Munroe, Intermetallics, 12 (2004) 851-858.

  159. “The structure and mechanical properties of Fe2AlMn single crystals”, M. Wittmann, I. Baker and P.R. Munroe, Philosophical Magazine, 84 (2004) 3169-3194.

  160. “Initial experiments on the effects of particles at grain boundaries on the anelasticity and creep behavior of granular ice”, M. Song, D. Cole and I. Baker, Annals of Glaciology, 39 (2005) 397-401.

  161. "An EBSP Study of Directionally Recrystallized Cold-Rolled Nickel”, J. Li and I. Baker, Materials Science and Engineering, A392 (2005) 8-22.

  162. "A New High-Strength Spinodal Alloy”, J.A. Hanna, I. Baker, M.W. Wittmann, and P.R. Munroe, J. Materials Research, 20 (2005) 791-795.

  163. “Creep of Granular Ice with and without Dispersed Particles”, M. Song, D. Cole and I. Baker, Journal of Glaciology, 51 (2005) 210-218.

  164. “Magnetic Ordering of Sputtered Nanostructured Fe50Ni50 Films”, Qi Zeng, Ian Baker and Yong Zhang, IEEE Transactions on Magnetics, 41(10) (2005)  3358-3360.

  165. “Microstructural Characterization of Ice Cores”, I. Baker, D. Iliescu, R. Obbard, H. Chang, B. Bostick and C.P. Daghlian, Annals of Glaciology, 42 (2006) 441-444.

  166.  “Strain-Induced Ferromagnetism in L12 Compounds”, I. Baker and D. Wu, TMS Letters, 2 (2005) 57-58.

  167. “The effect of particles on dynamic recrystallization and fabric development of granular ice during creep”, M. Song, I. Baker and D. Cole, Journal of Glaciology, 51(173) (2005) 377-382.

  168. “Magnetic Properties and Thermal Ordering of Mechanically Alloyed Fe-40 at.% Al”, Q. Zeng and I. Baker, Intermetallics, 14 (2006) 396-405.

  169. “Nanostructured Mn-Al permanent magnets produced by mechanical milling”, Q. Zeng, I. Baker, Z.-C. Yan, Journal of Applied Physics, 99 (2006) 08E902-1-3.

  170. “Heat Deposition in Iron Oxide and Iron Nanoparticles for Localized Hyperthermia”, I. Baker, Q. Zeng, W. Li and C.R. Sullivan, Journal of Applied Physics, 99 (2006) 08H106-1-3. Also listed in Virtual Journal of Biological Physics Research, 11(9) (2006).

  171. “Grain Boundary Grooving in Ice in a Scanning Electron Microscope”, R. Obbard, I. Baker and D. Iliescu, Journal of Glaciology, 52 (2006) 169-172.

  172. “Thickness dependence of the microstructure and magnetic anisotropy of sputtered Fe50Ni50 films”, Q. Zeng, I. Baker, Y. Sun, J.B. Cui, C. P. Daghlian, Journal of Applied Physics, 99 (2006) 08M302-1-3.

  173. “An Investigation of the Effects of Particles on the Creep of Polycrystalline Ice”, M. Song, D.M. Cole and I. Baker, Scripta Materialia, 55 (2006) 91-94.

  174. “Investigation of the Newtonian Creep in Polycrystalline Ice”, M. Song, D.M. Cole and I. Baker, Philosophical Magazine Letters, 86 (2006) 763-771.

  175. “Structural and Magnetic Properties of Nanostructured Mn-Al-C Magnetic Materials”, Q. Zeng, I. Baker, J.B. Cui and Z.C. Yan, Journal of Magnetism and Magnetic Materials, 308 (2007) 214-226.

  176.  “The Yield Strength Anomaly of Single-Slip-Oriented Fe-Al Single Crystals”, D. Wu, I. Baker, P.R. Munroe and E.P. George, Intermetallics, 15 (2007) 103-107.

  177. “The effects of local versus bulk disorder on the magnetic behavior of stoichiometric Ni3Al”, Q. Zeng and I. Baker, Intermetallics, 15 (2007) 419-427.

  178.  “Using Electron Backscatter Diffraction Patterns To Examine Recrystallization in Polar Ice Sheets”, R. Obbard, I. Baker and K. Sieg, Journal of Glaciology, 52 (2006) 546-557.

  179. “The Microstructure of Meteoric Ice from Vostok, Antarctica”, R. Obbard and I. Baker, Journal of Glaciology, 53 (2007) 41-62.

  180.  “The Structure and Mechanical Properties of River and Lake Ice”, D. Iliescu and I. Baker, Cold Regions Science and Engineering, 48 (2007) 202-217.

  181. “Fe/Fe oxide Nanocomposite Particles with Large Specific Absorption Rate (SAR) for Hyperthermia”, Q. Zeng, I. Baker, J. A. Loudis, Y. Liao, P.J. Hoopes, J. B. Weaver, Applied Physics Letters, 90 (2007) 233112-233114. Also available in the Virtual Journal of Biological Physics Research, 13(12) (2007).

  182. “Microstructural Characterization of Firn”, I. Baker, R.W. Obbard, D. Iliescu and D. Meese, Hydrological Processes, 21 (2007) 1624-1629.

  183.  “Soft ferromagnetism in nanostructured mechanical alloying FeCo-based powders”, Q. Zeng, I. Baker, V. McCreary and Z. Yan, Journal of Magnetism and Magnetic Materials, 318 (2007) 28-38.

  184. Effect of fine particles on the flow behavior of polycrystalline ice and glaciers - (I) a dislocation-based relaxation model”, M. Song, D.M. Cole and I. Baker, Chinese Journal of Geophysics (Acta Geophysica Sinica), 50 (2007) 126-130.

  185. “Effect of fine particles on the flow behavior of polycrystalline ice - (II) anelastic behavior”, M. Song, D.M. Cole and I. Baker, Chinese Journal of Geophysics (Acta Geophysica Sinica), 50 (2007) 1156-1160.

  186. “α- and β-Mn Precipitates in the Spinodal Fe30Ni20Mn25Al25 Alloy”, J.A. Loudis and I. Baker, Philosophical Magazine, 87 (2007) 5639-5656.

  187. “Effects of Degree of Deformation and Deformation Temperature on Primary Recrystallization Textures in Polycrystalline Nickel” H. Chang and I. Baker, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 38 A (2007) 2815-2824.

  188. "Isothermal Annealing of Cold-rolled High-Purity Nickel”, H. Chang and I. Baker, Materials Science and Engineering, A 476 (2008) 46-59.

  189. “Effects of Impurities and their Redistribution during Recrystallization of Ice Crystals”, D. Iliescu and I. Baker, Journal of Glaciology, 54 (2008) 362-370(9).

  190. “Dislocation Identification and In Situ Straining in the Spinodal Fe30Ni20Mn25Al25 Alloy”, J.A. Loudis and I. Baker, Microscopy Research and Technique, 71 (2008) 489-96.

  191. “Microstructure and Room-Temperature Mechanical Properties of Fe30Ni20Mn35Al15”, Y. Liao and I. Baker, Materials Characterization, in press (available online 4 February 2008).

  192. "Frequency distribution of the nanoparticle magnetization in the presence of a static as well as a harmonic magnetic field”, J.B. Weaver, AM Rauwerdink, C.R. Sullivan and I. Baker, Medical Physics, 35 (2008) 1988-1994. Also appears in Virtual Journal of Nanoscale Science & Technology, May 5, 2008, Vol. 17, Issue 18.

  193. “Experiments and Simulations of Directionally Annealed ODS MA 754”, I. Baker, B. Iliescu, J. Li and H.J. Frost, Materials Science and Engineering A, 492 (2008)353–363.

  194. “The effect of particles on creep rate and microstructures of granular ice during creep”, M. Song, I. Baker and D.M. Cole, Journal of Glaciology, 54 (2008) 533-537.

  195. “Polygonal Voids in Ice Cores”, R. Obbard, J. Chang and I. Baker, Journal of Glaciology, accepted subject to revision.

  196. “Investigating on the sintering process of dry snow”, S. Chen, R.W. Lomonaco and I. Baker, submitted to Hydrological Processes.

  197. “The influence of temperature gradient on dry snow metamorphism”, S. Chen and I. Baker, submitted to Hydrological Processes.

  198.  “Microstructural Evolution in the Spinodal Alloy Fe35Ni15Mn25Al25”, I. Baker, R.K. Zheng, D.W. Saxey, S. Kuwano, M.W. Wittmann, J.A. Loudis, K.S. Prasad, Z. Liu, R. Marceau and S.P. Ringer, Philosophical Magazine, in preparation.

  199. “A Dislocation-based Relaxation Model for Creep of Polycrystalline Ice Ih”, Min Song, D. M. Cole and I. Baker, in preparation.

  200. “Microstructural Characterization of Polycrystalline Ice from East Rongbuk Glacier, Mt. Everest”, R. Obbard, I. Baker and K. Sieg, in preparation.

  201. “Consolidation of Al and Mg Powders using Back-Pressure-Assisted ECAE”, I. Baker, D. Iliescu, Y. Liao, in preparation.

 

BOOK CHAPTERS

Top of Page

  1. "Intermetallic Compounds: An Update", I. Baker and E.P. George, in Sheetmetal Industries Yearbook 1993, Chapter IV part 1, 124-128.

  2. "Intermetallics: iron aluminides", E. P. George and I. Baker, in The Encyclopedia of Materials: Science and Technology, (Eds: K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan), Elsevier Press (Pergamon), 2001, 4201-4205.

  3. "Intermetallics: nickel aluminides", I. Baker and E. P. George, in The Encyclopedia of Materials: Science and Technology, (Eds: K.H.J. Buschow, R.W. Cahn, M.C. Flemings, B. Ilschner, E.J. Kramer, S. Mahajan), Elsevier Press (Pergamon), 2001, 4225-4232.

INVITED CONFERENCE PAPERS

Top of Page

  1. "Structure and Properties of Rapidly Solidified Intermetallic Compounds", I. Baker, E.M. Schulson and N.S. Stoloff, in "Mechanical Behavior of Rapidly Solidified Materials", Edited by- S.M.L. Sastry and B.A. MacDonald, The Metallurgical Society, Warrendale, Pa., (1986) 257-277. 

  2. "The Strength and Ductility of Intermetallic Compounds: Grain Size Effects", E.M. Schulson, I. Baker and H.J. Frost, " in "High Temperature Ordered Intermetallic Alloys II", Proceedings of the Material Research Society, 81 (1987) 195-205. 

  3. "Dislocation Structures in B2 Ordered Alloys", I. Baker, 47th Proceedings of the Electron Microscopy Society of America (1989) 314-315.

  4. "Properties of B2 Compounds", I. Baker and P.R. Munroe, Proceedings of the Symposium on "High Temperature Aluminides and Intermetallics", The Metallurgical Society, Edited by S.H. Whang, C.T. Liu, D.P. Pope and J.O. Stiegler, (1990) 425-452. 

  5. "Examination of Grain Boundary Structure and Chemistry in Ordered Alloys", I. Baker, in "Structure/Property Relationships for Interfaces", Edited by - J.L. Walter, A.H. King and K. Tangri, American Society of Metals, Materials Park, OH, (1991) 67-96. 

  6. "The Brittle to Ductile Transition and Slip Transmission Across Grain Boundaries in L12 Intermetallic Compounds", E.M. Schulson and I. Baker, "Ordered Intermetallics - Physical Metallurgy and Mechanical Behavior", Edited by C.T. Liu, R.W. Cahn and G. Sauthoff, Kluwer Academic Publishers, (1991) 371-389. 

  7. "Processing of Iron and Nickel Aluminides via Hot Extrusion", I. Baker and P. Nagpal, in "Processing and Fabrication of Advanced Materials for High Temperature Applications - II", Edited by T.S. Srivatsan and V.A. Ravi, The Metallurgical Society, Warrendale, Pa., (1993) 3-18. 

  8. "On In-Situ Study of Dislocation/Grain Boundary Interactions Using X-ray Topography and TEM", I. Baker and F. Liu, Proceedings of the Material Research Society, 319 (1994) 203-214.

  9. "Flow and Fracture of FeAl", I. Baker, in "Processing, Properties and Applications of Iron Aluminides, Edited by J.H. Schneibel and M.A. Crimp, The Metallurgical Society, Warrendale, Pa., 1994, 101-115. 

  10. "An Overview of Environmental Effects in Iron Aluminides", X. Pierron and I. Baker, Design Fundamentals of High Temperature Composites, Intermetallics and metal-Ceramic Systems", Editors - R.Y. Lin, Y.A. Chang, R.G. Reddy and C.T. Liu, The Metallurgical Society, Warrendale, Pa., 1996, 271-286. 

  11. "Deformation and Fracture of B2 Compounds", I. Baker, in Deformation and Fracture of Ordered Intermetallic Materials, Editors - W.O. Soboyejo, H.L. Fraser and T.S. Srivatsan, The Metallurgical Society, Warrendale, Pa., (1996) 27-44. 

  12. "Aluminides: Processing Properties and the Mechanical Properties of FeAl", I. Baker and E.P. George, in Proceedings of the International Symposium on Nickel and Iron Aluminides: Processing, Properties and Applications, Editors - S. Deevi and V. Sikka, The Metallurgical Society, Warrendale, Pa., (1997) 145. 

  13. "Brittle Fracture in B2 Compounds", P.R. Munroe and I. Baker, George R. Irwin Symposium on Cleavage Fracture, The Metallurgical Society, Warrendale, Pa., (1997) 329-346. 

  14. "The Mechanical Behavior of FeAl", I. Baker and E.P. George, "High Temperature Ordered Intermetallic Alloys VIII", Proceedings of the Material Research Society, 552 (1999) KK4.1.1.

  15. “An Overview of the Effects of Testing Environment on the Mechanical Properties of FeAl”, I. Baker, D. Wu, M. Wittmann, and E. P. George, Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM IV), Vol. I, (2001) 811-814.

  16. “Some Unusual Aspects of The Mechanical Behavior of FeAl”, I. Baker, in “Dislocations, Plasticity and Metal Forming”, Proceedings of Plasticity 2003, 7-9.

  17. “Synthesis and heating effect of iron/iron oxide composite and iron oxide nanoparticles”, Q. Zeng, I. Baker, J. A. Loudis, Y.F. Liao and P.J. Hoopes, Proc. SPIE, Thermal Treatment of Tissue: Energy Delivery and Assessment IV; Ed. - Thomas P. Ryan, 6440 (2007) 64400H.

  18. “Intratumoral Iron Oxide Nanoparticle Hyperthermia and Radiation Cancer Treatment”, P.J. Hoopes, R.R. Strawbridge, U. Gibson, Q. Zeng, Z. Pierce, I. Baker, R. Ivkov and A.R. Foreman, Proc. SPIE, Thermal Treatment of Tissue: Energy Delivery and Assessment IV; Ed. - Thomas P. Ryan, 6440 (2007) 64400K.

CONTRIBUTED CONFERENCE PAPERS

Top of Page

  1. "Micromechanisms of Recrystallization in Internally Oxidized Copper Crystals", I. Baker and J.W. Martin, 1st Risø International Symposium "Recrystallization and Grain Growth in Multi-Phase and Particle-Containing Alloys", Roskilde, Denmark, (1980) 27-33. 

  2. "Misorientations in Cold-Rolled Copper and Copper-Alumina Single Crystals", I. Baker and J.W. Martin, 10th International Congress on Electron Microscopy, Hamburg, W. Germany, Vol. I, (1982) 157-158.

  3. "The Effect of a Dispersed Phase upon the Deformation Structure of Rolled Copper Crystals", I. Baker and J.W. Martin, International Conference on the Strength of Metals and Alloys 6, Melbourne, Australia, Vol. I, (1982) 487-492. 

  4. "The Structure of Rapidly Solidified Powders of Ni3Al and Ni3Al + B + Ti", I. Baker, F.S. Ichishita and E.M. Schulson, in "Rapidly Solidified Metastable Materials", Proceedings of the Material Research Society 28 (1984) 395-399.

  5. "Observation of Slip Propagation Across Grain Boundaries in Ni3Al", I. Baker, E.M. Schulson and J.A. Horton, 44th Proceedings of the Electron Microscopy Society of America  (1986) 864-865.

  6. "The Microstructure and Tensile Properties of Extruded Melt-Spun Ribbons of Iron-Rich B2 FeAl", I. Baker and D.J. Gaydosh, in "High Temperature Ordered Intermetallic Alloys II", Proceedings of the Material Research Society 81 (1987) 315-320.

  7. "Effect of Boron on the Composition of Grain Boundaries in Ni3Al", I. Baker, E.M Schulson and J.R. Michael, Proceedings of the Analytical Electron Microscopy Workshop, Kona, Hawaii, (1987) 218-220.

  8. "The Ductility of Ni3Al and the Accommodation of Slip at Grain Boundaries", E.M. Schulson, I. Baker and H.J. Frost, Revue Physique Appliqué, 23 (1988) 705.

  9. "Annealing Studies of B2 FeAl", B. Schmidt, P. Nagpal and I. Baker, in "High Temperature Ordered Intermetallic Alloys III", Proceedings of the Material Research Society, 133 (1989) 755-760.

  10. "Improving the Ductility of NiAl", S. Guha, P.R. Munroe and I. Baker, in "High Temperature Ordered Intermetallic Alloys III", Proceedings of the Material Research Society, 133  (1989) 633-638.

  11. "Observation of Tweed Microstructures in Ni-Al-Fe Alloys", P.R. Munroe and I. Baker, 47th Proceedings of the Electron Microscopy Society of America  (1989) 676-677.

  12. "Grain Boundary Chemistry in Ni3Al and Ni3Si", I. Baker, E.M. Schulson, J.R. Michael and R.A. Padgett, Proceedings of the 5th International Conference on Intergranular and Interphase Boundaries in Materials", Colloque de Physique, 51 C1 (1989) 77-82.

  13. "An ALCHEMI Investigation of Ternary Site Occupancy in NiAl - based Alloys", P.R. Munroe and I. Baker, Proceedings of the XIIth International Congress for Electron Microscopy, (1990) 448-449.

  14. "Application of ALCHEMI to the Study of Non-Stoichiometric Compounds", P.R. Munroe and I. Baker, Proceedings of the XIIth International Congress for Electron Microscopy, (1990) 472-473.

  15. "Application of ALCHEMI to Intermetallic Compounds", P.R. Munroe and I. Baker, Proceedings of the Microbeam Analysis Society (1991) 297-300.

  16. "Room Temperature Strength and Fracture of FeAl and NiAl", P. Nagpal, I. Baker, F. Liu and P.R. Munroe, in "High Temperature Ordered Intermetallic Alloys - IV", Proceedings of the Material Research Society 213 (1991) 533-538.

  17. "Decomposition of Ni - 23 at. % Si and Formation of Ni3Si", I. Baker and E.M. Schulson, 49th Proceedings of the Electron Microscopy Society of America (1991) 600-601.

  18. "TEM In Situ Straining of Polycrystalline Stoichiometric NiAl", P. Nagpal and I. Baker, 49th Proceedings of the Electron Microscopy Society of America, (1991) 586-587.

  19. "TEM In Situ Straining of B2 Compounds", I. Baker, P. Nagpal, S. Guha and J.A. Horton, Proceedings 6th Japanese International Symposium on Intermetallic Compounds, (1991) 603-608.

  20. "Synchrotron X-Ray Topography of Polycrystalline Ice", F. Liu, I. Baker, G. Yao and M. Dudley, Proceedings of the 11th International Association for Hydraulic Research Ice Symposium, Banff, Canada, June, (1992) 1115-1126.

  21. "Room Temperature Fracture of Polycrystalline FeAl and NiAl", I. Baker, P. Nagpal, O. Klein and F. Liu, Processing of Materials, Edited by M.H. Loretto and C.J. Beevers, Birmingham, U.K., September, 1992, Vol. II, 665-670.

  22. "Dynamic Observations of Grain Boundaries and Dislocations in Ice", I. Baker, F. Liu and M. Dudley, Proceedings of the 6th International Conference on Intergranular and Interphase Boundaries, Material Science Forum, vol 126-128 (1993), 543-546.

  23. "The Effects of Stoichiometry on the Mechanical Behavior of Grain Boundaries in NiAl and FeAl", I. Baker, P. Nagpal and F. Liu, Proceedings of the 6th International Conference on Intergranular and Interphase Boundaries, Material Science Forum, vol 126-128 (1993), 495-498.

  24. "Room Temperature Fracture of FeCo", L. Zhao, I. Baker and E.P. George, "High Temperature Ordered Intermetallic Alloys V", Proceedings of the Material Research Society, 288 (1993) 501-506.

  25. "Environmental Effects in B2 FeAl Alloys", O. Klein, P. Nagpal and I. Baker, "High Temperature Ordered Intermetallic Alloys V", Proceedings of the Material Research Society, 288, (1993) 935-940.

  26. "A Review of the Flow and Fracture of FeAl", I. Baker and P. Nagpal, in "Structural Intermetallics", Edited by R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle and M.V. Nathal, The Metallurgical Society, Warrendale, Pa., 1993, 463-474.

  27. "In-situ Synchrotron X-ray Topographic Studies of Polycrystalline Ice", I. Baker, F. Liu, M. Dudley and D. Black, International Association for Hydraulic Research Ice Symposium, 1994, 416-425.

  28. "Dislocation/Grain Boundary Interactions in Ice Ih under Creep Conditions", F. Liu, I. Baker and M. Dudley, International Association for Hydraulic Research Ice Symposium, 1994, 484-494.

  29. "Dislocation Dissociation in L12 Ordered Alloy Ni3Ge" J. Fang, E.M. Schulson and I. Baker, 52nd Proceedings of the Microscopy Society of America  (1994) 688-689.

  30. "Dislocation Mobility in HCl-doped Ice", X. Hu, K. Jia, F. Liu, I. Baker and D. Black, Proceedings of the Material Research Society, 375 (1995), 287-292.

  31. "A New Method to Characterize Dislocation Loops", F. Liu, I. Baker and M. Dudley, Proceedings of the Material Research Society, 375 (1995), 319-324.

  32. "Wear of Ductile-Phase Toughened NiAl", F.E. Kennedy, I. Baker and B.J. Johnson, Proceedings of the Material Research Society, 364 (1995), 555-560.

  33. "Dislocation/Grain Boundary Interactions in Ice Crystals under Creep Conditions", I. Baker, F. Liu, K. Jia, X. Hu and M. Dudley, Materials Forum, 207-209 (1996) 581-584.

  34. "The Influence of Grain Boundaries on the Stored Energy of Cold-Work and Recrystallization Kinetics", D. Mandal and I. Baker, Materials Forum, 207-209 (1996) 521-524.

  35. "Influence of Composition and Environment on Wear of NiAl and Ni-Fe-Al", F.E. Kennedy, M. George, I. Baker, B.J. Johnson and N. Chang, Proceedings of the International Tribology Conference (1995), 337-342.

  36. "Dynamic In-situ Synchrotron X-ray Topographic Observations of Dislocations in Notched Ice Crystals", X. Hu, I. Baker and M. Dudley, in "Applications of Synchrotron Radiation to Materials Science", L. Terminello, S. Mini, D. L. Perry, and H. Ade (Eds.), Mat. Res. Soc. Symp. Proc., 437, (1996) 119-124.

  37. "Annealing of Cold-Rolled Fe-40Al single Crystals", Y. Yang and I. Baker, Proceedings of the Material Research Society, 460 (1997) 367-372.

  38. "A Model for the Yield Strength Anomaly in FeAl", I. Baker and E. P. George, Proceedings of the Material Research Society, 460 (1997) 373-378.

  39. "Effect of Iron Content and Heat-Treatment on The Precipitation of a New Tetragonal Boride in FeAl + B",  X. Pierron and I. Baker, Proc. of the Material Research Society, 460 (1997) 331-336.

  40. "Boron Strengthening in FeAl" I. Baker, X. Li, H. Xiao, O. Klein, C. Nelson, R. L. Carleton and E. P. George, in "Interstitial and Substitutional Solute Effects in Intermetallics", Edited by I. Baker, R.D. Noebe and E.P. George, The Metallurgical Society, Warrendale, Pa., (1998), 23-38.

  41. "Annealing of Quenched FeAl alloys with and without B and Ti, Y. Yang and I. Baker,  "High Temperature Ordered Intermetallic Alloys VIII", Proceedings of the Material Research Society, 552 (1999) KK8.22.1.

  42. “Study of Electrical Properties of Dislocations in ZnS using Electric Force Microscopy”, G. F. Bai, V. F. Petrenko, and I. Baker, Proceedings of the Material Research Society, 578 (2000) 255--260.

  43. "The Effect of H2SO4 on the stress exponent in Ice Single Crystals", I. Baker, Y.L. Trickett and P.M.S. Pradhan, Deformation of Glacial Materials, Ed- A.J. Maltman, B. Hubbard and M.J. Hambrey, Geological Society, London, Special Publications, 176 (2000) 39-45.

  44. “Directional Recrystallization Processing”, I. Baker, A. Badmos and H.J. Frost, Proceedings of the AFOSR Metallic Materials Contractors Meeting, St Louis, Mo, 13-14th, October, 2000.

  45. “Directional Recrystallization Processing”, J. Li, I. Baker and H.J. Frost, Proceedings of the 2001 NSF Design, Service and Manufacturing Grantees and Research Conference, Tampa, Florida, January 7-10, 2001.

  46. "Simulation of Microstructural Evolution during Directional Annealing", A.Y. Badmos, I. Baker, H.J. Frost, Recrystallization and Grain Growth, Proceedings of the 1st Joint International Conference, Eds. - G. Gottstein and D.A. Molodov, Aachen, Germany, Springer-Verlag, 2001, 1041-1046.

  47. “Dislocation Motion Around Loaded Notches in Ice Single Crystals”, D. Cullen, X. Hu, I. Baker and M. Dudley, in High Temperature Ordered Intermetallic Alloys IX", Proceedings of the Material Research Society, 590 (2001) 291-296.

  48. “The Effects of Environment on the Room-Temperature Deformation of B2-structured Fe-43Al Single Crystals”, I. Baker, D. Wu and E.P. George, in High Temperature Ordered Intermetallic Alloys IX", Proceedings of the Material Research Society, 646 (2001) N5.1.1-N5.1.7.

  49. “Strain-Induced Ferromagnetism in FeAl Single Crystals”, D. Wu and I. Baker, in High Temperature Ordered Intermetallic Alloys IX", Proceedings of the Material Research Society, 646 (2001) N3.2.1-N3.2.6.

  50. “The Yield Anomaly in CoTi” M. Wittmann, I. Baker and N.D. Evans, in High Temperature Ordered Intermetallic Alloys IX", Proceedings of the Material Research Society, 646 (2001) N3.5.1-N3.5.6.

  51. “The Low-Temperature Tensile Behavior of FeAl Single Crystals”, I. Baker, D. Wu and E. P. George, Proceedings of the Third International Symposium on Structural Intermetallics, Eds. - K.J. Hemker et al., The Minerals, Metals and Materials Society, Warrendale, PA., 2001, 279-288.

  52. “Directional Recrystallization Processing”, I. Baker, A. Badmos and H.J. Frost, Proceedings of the AFOSR Metallic Materials Contractors Meeting, Snowbird, Utah, 21st - 22nd, August, 2001.

  53. “Directional Recrystallization Processing”, J. Li, I. Baker, A. Badmos and H.J. Frost, Proceedings of the 2001 NSF Design, Service and Manufacturing Grantees and Research Conference, San Juan, Peurto Rico, January 7th-11th, 2002.

  54. “The Effects of Boron on the Yield Strength Anomaly in FeAl Single Crystals”, E. P. George, D. Wu and I. Baker, Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM IV), Vol. I, (2001) 815-818.

  55.  “The Mechanical Behavior of Fe2AlX L21 Compounds “, M. Wittmann, I. Baker, S.L. Johns and V.N. Durand, Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM IV), Vol. I, (2001) 827-830.

  56. “Time and Orientation Dependence of the Ferromagnetism in Plastically Strained Feal Single Crystals “ D. Wu and I. Baker, Proceedings of the Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM IV), Vol. I, (2001) 823-826.

  57. "The Effects of H2SO4 on the Mechanical Behavior of Ice Single Crystals", I. Baker, Y.L. Trickett, D. Iliescu and P.M.S. Pradhan, in Creep Deformation Fundamentals and Applications, Ed. - R.S. Mishra, J.C. Earthman and S.V. Raj, TMS, Warrendale, PA (2002) 85-94.

  58. "Structure, Chemistry and Properties of Grain Boundaries in H2SO4-Doped Ice", D. Iliescu, D. Cullen, C. Muscat and I. Baker, Proceedings of Microscopy and Microanalysis 2002, 1544-45CD.

  59. "SEM/EDS Studies of Impurities in Natural Ice ", D. Cullen, D. Iliescu and I. Baker, Proceedings of Microscopy and Microanalysis 2002, 1398-9CD.

  60. "Scanning Electron Microscopy of Vostok Acrretion Ice", D. Cullen and I. Baker, Proceedings of Microscopy and Microanalysis 2002, 1546-7CD.

  61. "Characterization of directionally recrystallized cold-rolled nickel using EBSP", B. Iliescu, J. Li and I. Baker, Proceedings of Microscopy and Microanalysis 2002,1264-5CD.

  62. “Directional Recrystallization Processing”, I. Baker, A.Y. Badmos, J. Li and H.J. Frost*, Proceedings of the AFOSR Metallic Materials Contractors Meeting, Bar Harbor, ME, 14th-16th, August, 2002.

  63. "Directional Annealing of Cold-Rolled Polycrystalline Nickel", J. Li, B. Iliescu, I. Baker and H.J. Frost, Proceedings of the 2003 NSF Design, Service and Manufacturing Grantees and Research Conference, Birmingham, Al, January 5th-8th, 2003.

  64. “The Effects of Ternary Additions on the Saturation Magnetization of Nanocrystalline FeCo Powders", I. Baker, R.G. Quiller, M. Robson and D. Wu, in "High Temperature Ordered Intermetallic Alloys X", Proceedings of the Material Research Society, 753 (2003) BB5.48.

  65. “The Effects of Dopants on the Flow and Fracture of Ice Single Crystals”, I. Baker, D. Iliescu, Y.L. Trickett, X. Li, and H.J. Frost, in “Dislocations, Plasticity and Metal Forming”, Proceedings of Plasticity 2003, 121-123.

  66. “A Technique for the Scanning Electron Microscopy and Microanalysis of Uncoated Ice Crystals” R. Obbard, D. Iliescu, I. Baker and D. Cullen, Electron Microscopy: Its Role in Materials Science, The Mike Meshii Symposium, TMS, Warrendale, PA (2003) 133-140.

  67. “Static and Directional Annealing of Cold-Rolled Nickel”, J. Li, I. Baker and H.J. Frost, Proceedings of the 2004 NSF Design, Service and Manufacturing Grantees and Research Conference, Dallas, TX, January 5th-8th, 2004.

  68. “Magnetic Properties of Nanocrystalline Fe50Co50 Powders” B. Shashishekar and I. Baker, in “Continuous Nanophase and Nanostructured Materials”, Proceedings of the Material Research Society, 788 (2004) L3.13.1-7.

  69. “Recrystallization Processing of Cold-Rolled Nickel”, I. Baker, H. Chang and J. Li, in Interfacial Engineering for Optimized Properties III, Proceedings of the Material Research Society, vol. 819 (2004) 255-263.

  70. Characterization of the microstructure and mechanical properties in seasonal lake and river ice” D. Iliescu and I. Baker, Proceedings of the 24th Army Science Conference, Orlando, Fla, Nov. 29th – Dec. 2nd, 2004, article OS-26.

  71. “Static and Directional Annealing of Cold-Rolled High Purity Nickel”, H. Chang and I. Baker, Proceedings of the 2005 NSF Design, Service and Manufacturing Grantees and Research Conference, Scottsdale, AZ, January 3-6 2005.

  72. “Microstructure and Mechanical Properties of Fe-Ni-Mn-Al Alloys”, M.W. Wittmann I. Baker, J.A. Hanna and P. R. Munroe, in Integrative and Interdisciplinary Aspects of Intermetallics, Proceedings of the Material Research Society, vol. 842 (2005) S5.17.1-6.

  73. “Characterization of Rolled and Recrystallized High-Purity Nickel Using EBSP”, H. Chang and I. Baker, Proceedings of Microscopy & Microanalysis 2005, Honolulu, Hawaii, July 31-August 4, 2005, p2022-2023.

  74. “Orientation Mapping in Polycrystalline Ice Using Electron Backscatter Patterns” D. Iliescu, I. Baker, and C. P. Daghlian, Proceedings of Microscopy & Microanalysis 2005, Honolulu, Hawaii, July 31-August 4, 2005, p1500-1501.

  75. “Nanostructural Analysis of Advanced Alloys in a Local Electrode Atom Probe”, D.W. Saxey, J. Hanna, R. Zheng, R.K.W. Marceau, I. Baker and S.P. Ringer, Proc. Microscopy & Microanalysis 2005, Honolulu, Hawaii, p872-873.

  76. “Microstructure of a Spinodal Fe-Ni-Mn-Al Alloy”, I. Baker, J. A. Hanna, M. W. Wittmann, P. R. Munroe, Proc. Microscopy & Microanalysis 2005, Honolulu, Hawaii, p1864-1865.

  77.  “Effects of silt particles on the creep of granular ice”, M. Song, I. Baker and D.M. Cole, Creep Deformation and Fracture, Design and Extension, Edited by R.S. Mishra, J.C. Earthman, S.V. Raj and R. Viswanaathan, 2005, 277-284.

  78. “The mechanical properties of Fe30Ni20Mn25Al25“, I. Baker, J.A. Hanna, M.W. Wittmann and P.R. Munroe, Processing and Fabrication of Advanced Materials XIV With Frontiers in Materials Science 2005: Innovative Materials and Manufacturing Techniques, 237-247

  79. “Isothermal and Directional Annealing of Cold-Rolled High-Purity Nickel”, H. Chang and I. Baker, Proceedings of the 2006 NSF Design, Service and Manufacturing Grantees and Research Conference, St. Louis, Mo., July 24th-27th, 2006.

  80. “Microstructural Characterization of Firn”, I. Baker, R.W. Obbard, D. Iliescu and D. Meese, Proceedings of the 63rd Eastern Snow Conference, Newark, DE, 2006, p211-218.

  81. "Microstructure and Mechanical Properties of an Extruded Fe30Ni20Mn25Al25 Alloy”, J. Loudis, T. C. Boyd, D. Coen and I. Baker, in “Advanced Intermetallic-Based Alloys”, Proceedings of the Materials Research Society, 980 (2007) 0980-II01-02980.

  82. “The Heating Effects of Dextran Coated Iron Oxides”, Q. Zeng, I. Baker and P.J. Hoopes, in “Nanoscale Magnets -- Synthesis, Self-Assembly, Properties and Applications”, Proceedings of the Materials Research Society, 962 (2007) 0962-P10-16.

  83. “Coercivity in Nanostructured Mechanically-Alloyed FeCo-based Powders Prepared by Mechanical Alloying”, Q. Zeng, I. Baker, V. McCreary and Z. Yan, in “Advanced Intermetallic-Based Alloys”, Proceedings of the Materials Research Society, 980 (2007) 0980-II06-09.

  84.  “Advanced Electron Microscopy Techniques for Studying Ice and Firn Cores” I. Baker, K. Sieg, N. Spaulding and D. Meese, Proceedings of the 10th International Symposium on Antarctic Earth Sciences, University of California- Santa Barbara, CA, August 26th-31st, 2007.

  85. “A Microstructural Study of Wear in Nanocrystalline Metals and Alloys” I. Baker, Y. Sun, F.E. Kennedy, D. Iliescu and Q. Zeng, Proceedings of 2008 NSF Engineering Research and Innovation Conference, Knoxville, TN, January 7-10th, 2008.

  86. “Dislocation/APB Interaction during TEM In-Situ Straining of Fe2MnAl”, Y. Liao and I. Baker, Microscopy and Microanalysis 2008 Meeting, Albuquerque, New Mexico, August 3rd-7th, 2008.

  87. “Microstructure and Fractography of Eutectoid Fe30Ni20Mn35Al15”, Y. Liao and I. Baker, Microscopy and Microanalysis 2008 Meeting, Albuquerque, New Mexico, August 3rd-7th, 2008.

  88. “Multidisciplinary Approach to Introductory Engineering Design”, I. Baker, W. Lotko, J.P. Collier, Frontiers in Education, October 22nd -25th, 2008, Saratoga Springs, NY, in press.

OTHER ARTICLES

Top of Page

  1. "Direct Measurement of Superlattice Dislocation Separations in Ni3Al", J.A. Horton and I. Baker, Energy Conservation and Utilization of Technologies Quarterly, September 1986, 252-254.

  2. "Improving Intermetallic Ductility and Toughness", I. Baker and P.R. Munroe, J. Metals 40 (1988) 28-31.

  3. "Structural Intermetallic Compounds", P.R. Munroe and I. Baker, Metals and Materials, 4 (1988) 435-438.

  4. "Metals pass the endurance test", I. Baker, New Scientist, 30th May (1992) 34-38.

  5. "Intermetallic Compounds: An Update", I. Baker and E.P. George, Metals and Materials, 8 (1992) 318-323.

  6. "Synchrotron X-ray Topographic Studies of Dislocations in Polycrystalline Ice", I. Baker, F. Liu, K. Jia, X. Hu and M. Dudley, Antarctic Journal: Review 1995, 30(5) (1997) 75-76.

  7. "Impurities in Greenland Ice", D. Cullen, L. Torrey and I. Baker, Engineering Research Review, Thayer School of Engineering, July 1999-June 2000, 12-19.
     

  8. “Introduction” to the special issue on Advanced Techniques for the Characterization of Ice and Snow in Microscopy Research and Technique, 62 (2003) 1.

CONFERENCE PROCEEDINGS EDITED

Top of Page

  1. "High Temperature Ordered Intermetallic Alloys - V", Edited by I. Baker, R. Darolia, J.D. Whittenberger and M. H. Yoo, Proceeding of the Materials Research Society, vol. 288, 1993.

  2. "High Temperature Ordered Intermetallic Alloys - VI", Edited by J.A. Horton, S. Hanada, I. Baker, R. D. Noebe and D. Shwartz, Proceeding of the Materials Research Society, vol. 364, 1995.

  3. "Physics and Chemistry of Ice 1996", Ed-V.F. Petrenko, S. Colbeck, I. Baker, E.M. Schulson, G. Ashton, N. Kushnatdinov, special issue of the Journal of Physical Chemistry, 1997.

  4. "Interstitial and Substitutional Solute Effects in Intermetallics", Edited by I. Baker, R.D. Noebe and E.P. George, TMS, Warrendale PA, 1998.

Top of Page