Acids, Bases, and Buffers 1: Monoprotic and Polyprotic Acids Overview Getting Started Techniques Procedure FAQ Full Lab Manual Introduction & Goals Chemistry & Background Key Questions Prelab Problems Safety Procedure In Your Write-up Experiments Index ChemLab Home		Using a Buret To titrate your solutions, you will need to prepare a buret. Details can be found on the buret page in the Techniques section of the website. Titration You will titrate samples of acetic and phosphoric acid with NaOH. The purpose of these titrations is to map out the titration curve accurately, not to determine the position of the endpoint of a reaction, as in previous titration experiments. Because of this, the titration is performed somewhat differently. For instructions, see the Titration page in the Techniques section of the ChemLab website. Using a pH meter Make sure your pH meter is properly standardized before you begin your titration. Check the standardization between titrations. Technique Links buret titration pH meter
Trustees of Dartmouth College, Copyright 1997–2003