Overall System Status:
Check with others in your area or building to determine if they are also having problems. If so, please contact the IT Service Desk at 646-2999, send e-mail to firstname.lastname@example.org, or call your department's IT support office.
If you are the only one having problems, depending on how your computer is connecting to the network, make sure your computer's networking software is configured properly by reviewing the documentation on the Wired or Wireless web page.
All computers on campus trying to access the wired network must be registered. If your computer may not already be registered, you can easily register it by opening a web browser. If your computer is not registered, you will then be redirected to a web page where you can enter a brief description of the computer followed by your authentication information (name and password). Once you receive the message that it is successfully registered, you can either restart your computer or wait about 2 minutes for network access.
Unplug the cable from the computer and plug it back in until you hear a click. Unplug the cable at the Ethernet port on the wall and plug it back in until you hear a click. Also, active Ethernet ports are marked with a blue tab or dot. Try plugging your computer into a different active Ethernet port to see if it makes a difference. If using a different Ethernet port resolves the problem, then contact the IT Service Desk at 646-2999, send e-mail to email@example.com, or call department's IT support office. Someone will help you get the non-working port repaired.
If so, there will be two Ethernet cables to check. One cable connects the phone to the Ethernet port on the wall. The other cable connects the computer to the phone. Unplug both cables at the phone and plug them back in again in the same locations. Push firmly until you hear a click to make sure they are connected securely.
Make sure the Ethernet cable is plugged into the Ethernet port on your computer; not the modem port. Since an Ethernet cable is slightly larger than a phone cable, it will not fit easily into the modem port. The Ethernet cable should fit easily into the Ethernet port on your computer. Try unplugging and re-plugging the Ethernet cable into the Ethernet port on your computer; sometimes this will solve the problem.
An Ethernet cable looks very similar to a phone cable, but is slightly larger. Try using your Ethernet cable on a computer you know connects properly to the network. Make sure this other computer can still connect to the network when using your Ethernet cable. If it cannot, then you need a new Ethernet cable.
If so, have you installed any new software or hardware since the last time you were able to connect to the network? Try removing the new software or hardware you installed, and restarting your computer.
For wireless networking issues, make sure your Airport card is turned on and receiving a signal. You can turn your Airport card on or off by selecting the Airport symbol from the right-hand side of the Menu bar, or by selecting System Preferences from the Apple menu, double-clicking on Network, selecting Airport, then Turn Airport On.
If the Airport card is on, make sure it is receiving a signal. The icon will light up the bars according to the strength of the signal; if the icon is empty, you are not receiving a signal.
Make sure your computer is connected to the Dartmouth Secure network. If it is not, you will not be able to access certain campus services, such as the GreenPrint printers or some Web sites.
If you continue to have problems connecting your computer to the Dartmouth network, contact the IT Service Desk at 646-2999, send e-mail to firstname.lastname@example.org, or call your department's IT support office.
Last Updated: 8/8/10